Txhua pawg
EN

Tsev>Yajthem tuaj yeem ua tshuab

Hais txog peb

Xov xwm

Tiv tauj peb

  • https://www.gstartin.com/upload/product/1608859551251489.jpg
  • https://www.gstartin.com/upload/product/1608859561393719.jpg
  • https://www.gstartin.com/upload/product/1608859561748467.jpg
  • https://www.gstartin.com/upload/product/1608859561743286.jpg

Tsis siv neeg tin tuaj yeem kaw kaw lub tshuab kaw khoom

Qhov chaw ntawm keeb kwm: Tuam Tshoj
Hom Npe: G STAR
Model Number: TM0005
Certification: CE
Yam Tsawg Tshaj: 1 Txheej
Ntim Paub meej: Ntoo ntaub ntawv
Tus me nyuam lub sij hawm: Nyob ib ncig ntawm 45days
Ntsiab lus uas them: Los ntawm T / T, 30% tso nyiaj, tshuav nyiaj li cas ua ntej ua zaub mov xa tuaj
Mov Muaj peev xwm: 1000sets tauj ib lub hlis


Nug Tam Sim No →
  • Hauj lwm
  • tsis
  • Daim ntawv thov
  • Nug

1. The can sealing machine is composed of a machine table, an inlet conveyor, a holding and conveying device, a can sealing head (four wheels), a cap separating device, an outlet conveyor, a pneumatic system and a control system.

2. Using Schneider PLC, fully digital automatic control. Servo system is used to feed the tank, and the operation is accurate, stable and reliable.

3. A variety of specifications and varieties can be produced on one line.

4. The conveyor uses plastic chains to avoid scratches on the tank.

5. The lubrication system is controlled by PLC, which automatically lubricates on time, and the lubrication frequency can be set freely.

6. The head of the can sealing machine does not need a clutch, and the transmission chain is optimized and shortened, which reduces wear, extends service life and reduces maintenance rate.

7. Using double-edged split cover, equipped with detection system to ensure that the split cover is in place.

8. When the tank height is adjusted, the machine head adopts PLC control and automatic adjustment, automatic terminal detection, so that the height adjustment is completed by only one signal, which is fast and accurate.

Parameters
Qhuav muaj peev xwm 20-30pcs / min
Tin can diameter 200-300 (hli)
Tin can height 150-400(mm),height can be adjusted
Capping mode Double-edged automatic cap drop (with automatic detection)
Tus naj npawb ntawm chais 4 yob
PLC tswj Schneider
Kov npo Qhov
Tshuab loj 2300 x 1000 x 2000(mm) can customize
hwj chim 2.2KW
Gross hnyav 1200kgs


Application

    This seamer is mainly used for automatic sealing of square,round tin cans in chemical, food and other industries.

Contact Peb