Ҳамаи категорияҳо
EN

Асосӣ>Мошинсозии тунука

Дар бораи мо

ахбор

Бо мо тамос гиред

  • https://www.gstartin.com/upload/product/1608859551251489.jpg
  • https://www.gstartin.com/upload/product/1608859561393719.jpg
  • https://www.gstartin.com/upload/product/1608859561748467.jpg
  • https://www.gstartin.com/upload/product/1608859561743286.jpg

Қалъаи худкор метавонад дӯзандаи мошини басташударо маҳкам кунад

Ҷои истеҳсолкардаи: Хитой
Номи бренд: G STAR
Number модел: TM0005
сертификатсия: CE
Меъёри ҳадди аққал: 1 Set
Маълумоти иловагӣ: Ҳуҷайраҳои Вуд
Вақти расондан: Around 45days
Шартҳои пардохт: By T/T, 30% deposit, balance before shipment
Таҳвили ќобилият: 1000sets per month


Пурсиш Ҳоло →
  • Тавсифи
  • параметрҳо
  • Ариза
  • пурсиш

1. The can sealing machine is composed of a machine table, an inlet conveyor, a holding and conveying device, a can sealing head (four wheels), a cap separating device, an outlet conveyor, a pneumatic system and a control system.

2. Using Schneider PLC, fully digital automatic control. Servo system is used to feed the tank, and the operation is accurate, stable and reliable.

3. A variety of specifications and varieties can be produced on one line.

4. The conveyor uses plastic chains to avoid scratches on the tank.

5. The lubrication system is controlled by PLC, which automatically lubricates on time, and the lubrication frequency can be set freely.

6. The head of the can sealing machine does not need a clutch, and the transmission chain is optimized and shortened, which reduces wear, extends service life and reduces maintenance rate.

7. Using double-edged split cover, equipped with detection system to ensure that the split cover is in place.

8. When the tank height is adjusted, the machine head adopts PLC control and automatic adjustment, automatic terminal detection, so that the height adjustment is completed by only one signal, which is fast and accurate.

Parameters
иқтидори истеҳсолӣ 20-30pcs / min
Tin can diameter 200-300(mm)
Tin can height 150-400(mm),height can be adjusted
Capping mode Double-edged automatic cap drop (with automatic detection)
Number of rollers 4 rollos
PLC control Шнайдер
Шишаи ламсӣ дастрас
андозаи мошин 2300 x 1000 x 2000(mm) can customize
ҳокимият 2.2KW
вазни умумии 1200kgs


Aнусхабардорӣ

    This seamer is mainly used for automatic sealing of square,round tin cans in chemical, food and other industries.

Contact Мо